NETGEAR 7300 Series user manual Dhcp Server Configuration Commands, Client-identifier, Client-name

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Chapter 12

DHCP Server Commands

DHCP Server Configuration Commands

These commands configure the DHCP Server parameters and address pools.

client-identifier

This command specifies the unique identifier for a DHCP client. Unique-identifier is a valid notation in hexadecimal format.

Default	None
Format	client-identifier <uniqueidentifier>
Mode	DHCP Pool Config Mode
no client-identifier

This command deletes the client identifier.

Format	no client-identifier
Mode	DHCP Pool Config Mode

client-name

This command specifies the name for a DHCP client. Name is a string consisting of standard ASCII characters.

Default	None
Format	client-name <name>
Mode	DHCP Pool Config Mode
no client-name

This command removes the client name.

DHCP Server Commands 12-1

202-10009-01_060204