User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
disconnect
This command closes a telnet session.
Format | disconnect | {<sessionID> all} |
Mode | Privileged | EXEC |
show loginsession
This command displays current telnet and serial port connections to the switch.
Format | show loginsession |
Mode | Privileged EXEC |
ID | Login Session ID |
User Name The name the user will use to login using the serial port or Telnet. A new user may be added to the switch by entering a name in a blank entry. The user name may be up to 8 characters, and is not case sensitive. Two users are included as the factory default, admin and guest.
Connection From | IP address of the telnet client machine or |
| port connection. |
Idle Time | Time this session has been idle. |
Session Time | Total time this session has been connected. |
show users
This command displays the configured user names and their settings. This command is only available for users with readwrite privileges. The SNMPv3 fields will only be displayed if SNMP is available
on the system.
Format | show users |
Mode | Privileged EXEC |
User Name | The name the user will use to login using the serial port, Telnet or |
| Web. A new user may be added to the switch by entering a name |
| in a blank entry. The user name may be up to eight characters, and |
| is not case sensitive. Two users are included as the factory |
| default, admin and guest |
|
|
Switching Commands |
