NETGEAR 7300 Series user manual Vlan port pvid all, Vlan port tagging all, Vlan protocol group

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

vlan port pvid all

This command changes the VLAN ID for all interface.

Default	1
Format	vlan port pvid all <1-4094>
Mode	Global Config
no vlan port pvid all

This command sets the VLAN ID for all interfaces to 1.

Format	no vlan port pvid all <1-4094>
Mode	Global Config

vlan port tagging all

This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification number.

Format	vlan port tagging all <1-4094>
Mode	Global Config
no vlan port tagging all

This command configures the tagging behavior for all interfaces in a VLAN to disabled. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification number.

Format	no vlan port tagging all <1-4094>
Mode	Global Config

vlan protocol group

This command adds protocol-based VLAN group to the system. The <groupName> is a character string of 1 to 16 characters. When it is created, the protocol group will be assigned a unique number that will be used to identify the group in subsequent commands.

Format	vlan protocol group <groupname>
Switching Commands	8-75

202-10009-01_060204