User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

no vlan ingressfilter

This command disables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN.

Format

no vlan ingressfilter

Mode

Interface Config

vlan makestatic

This command changes a dynamically created VLAN (one that is created by GVRP registration) to a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN identification number. VLAN range is 2-4094.

Format

vlan

makestatic <2-4094>

Mode

VLAN

database

vlan name

This command changes the name of a VLAN. The name is an alphanumeric string of up to 16 characters, and the ID is a valid VLAN identification number. ID range is 1-4094.

Default

The name for VLAN ID 1 is always Default. The name for other

 

VLANs is defaulted to a blank string.

Format

vlan name <2-4094> <name>

Mode

VLAN database

no vlan name

 

This command sets the name of a VLAN to a blank string. The VLAN ID is a valid VLAN identification number. ID range is 1-4094.

Format

no vlan name <2-4094>

Mode

VLAN database

vlan participation

This command configures the degree of participation for a specific interface in a VLAN. The ID is a valid VLAN identification number, and the interface is a valid interface number.

8-72

Switching Commands

202-10009-01_060204

Page 138
Image 138
NETGEAR 7300 Series user manual Vlan makestatic, Vlan name, Vlan participation, No vlan ingressfilter, No vlan name