User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

4.When the following screen appears, make sure that the port setting are as follows:

Baud Rate:

9600

Data Bits:

8

Parity:

None

Stop Bits:

1

Flow Control:

None

Figure 3-4: Connection Settings

5.Click OK.

The HyperTerminal window will open and you should be connected to the switch. If you do not get a welcome screen or a system menu, press the return key.

When attached to the User Interface via a Telnet Session, the following must be set in order to use the arrow keys: Under the terminal pull down menu, choose Properties and make sure the VT100 Arrows option is turned on.

Administration Console Telnet Interface

3-3

202-10009-01_060204

Page 35
Image 35
NETGEAR 7300 Series user manual Connection Settings