
Attaching the stand
•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV.
1Confi rm the screws supplied with the TV.
Screws (m4) (used in step 3)
2Insert the stand base to the stand post on the bottom of the TV. (1)
3 Insert and tighten the 4 screws into the 4 holes |
Soft cushion
* Stand post
CAUTION
•To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box), PC or other external equipment.
•Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using the INPUT 3/INPUT 4 or INPUT 5 terminals.
on the bottom of the stand base. (2) |
NOTE
•To detach the stand, perform the steps in reverse order. * When installing the Liquid Crystal Television on a wall
mount bracket, it is necessary to remove the stand post.
Screw
Screw driver
When using component cable (commercially available)
Y
PB
(CB)
PR
(CR)
L
AUDIO
R
When using composite cable or
or
VIDEO
L
AUDIO
R
Setting the TV
Place the TV close to the AC outlet, and keep the power plug within reach.
Standard DIN45325 plug
Antenna cable (commercially available)
AC cord
AC outlet
Product shape varies in some countries.
Antenna
Connect the antenna cable from your
An indoor antenna can also be used under good reception conditions. Passive and active room antennas are offered commercially. In an active antenna its power is supplied via the antenna input terminal.
The supply voltage (5V) must be correspondingly set under “Supply Voltage”.
VCR/Game | VCR/Game |
console/Camcorder | console/Camcorder |
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1/INPUT 2 (HDMI), INPUT 3/INPUT 4 terminals when connecting to a DVD player/ Digital TV STB (Set Top Box) and other audiovisual equipment.
When using | When using component cable |
(commercially available) | (commercially available) |
| Y |
| PB |
| (CB) |
| PR |
| (CR) |
| L |
DVD player/ | AUDIO |
R | |
Digital TV STB (Set Top Box) |
|
| DVD player/ |
| Digital TV STB (Set Top Box) |
Connecting a PC
You can use the INPUT 6 (PC) terminals when connecting to a PC.
ANALOG
RGB
AUDIO
(L/R)
PC
3 | 4 |