Sharp LC-32A37M Picture menu, Audio menu Continued, Power Control menu, Setup menu

Auto Installation Programme Setup Child Lock Position

WSS

4:3 Mode

Output Volume Select Language

Text Language

Picture menu

MENU [Picture]

Picture				Audio		Power Control
AV Mode					[ USER ]
OPC						[ Off ]
Backlight	[STD]			–8		+8
Contrast	[ + 3 2		]	0		+40
Brightness	[	0	] –30			+30
Colour	[	0	] –30			+30
Tint	[	0	] –30			+30
Sharpness	[	0	]	0		+10
Colour Temp.					[ Middle ]
Reset

1Press MENU and the MENU screen displays.

2Press c/d to select “Picture”.

3Press a/b to select the desired menu item. Press ENTER to proceed if necessary.

HColour Temp. (Colour Temperature)

Adjusts the colour temperature to give the best white image.

Selected item	Description
High	White with bluish tone
Mid-High
Middle
Mid-Low
Low	White with reddish tone

NOTE

•For resetting all adjustment items to factory preset values, press a/b to select “Reset”, press ENTER, press c/d to select “Yes”, and then press ENTER.

•“Backlight” cannot be adjusted when “OPC” is set to “On” or “On:Display”.

Audio menu

MENU [Audio]

Picture Audio Power Control

Audio menu (Continued)

HAuto Vol

Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements. The Automatic Volume Control (Auto Vol) solves this problem and equalises the volume levels.

HClear Voice

This function emphasises speech voice against the background noise for more intelligibility. It is not recommended for music sources.

NOTE

•For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, press ENTER, press c/d to select “Yes”, and then press ENTER.

Power Control menu

HPower Management (PC input mode only)

1Repeat steps 1 to 2 in Power Control menu.

2Press a/b to select “Power Management”, and then press ENTER.

3Press a/b to select “Mode1” or “Mode2”, and then press ENTER.

Selected item	Description
Off	• No power management
	• Factory preset value.
Mode1	• If no signal inputs for approximately 8
	minutes, the power shuts down.
	• Even if you start using the PC and the
	signal inputs again, the TV stays off.
	• The TV turns on again by pressing
	POWER. (See page 7.)
Mode2	• If no signal inputs for approximately 8
	seconds, the power shuts down.
	• When you start using the PC and the
	signal inputs again, the TV turns on.

4 Press a/b or c/d to select the desired item

or adjust the item to the desired level. Press

ENTER if necessary.

HOPC (Optical Picture Control) setting You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions.

AV Mode
Treble	[	0 ]	–15
Bass	[	0 ]	–15
Balance	[	0 ]	L
Surround
Auto Vol

Clear Voice

Reset

[ USER ]

+15

+15

R

[ Off ] [ Off ] [ Off ]

MENU [Power Control]

Audio	Power Control	Setup
	No Signal Off	[ Disable ]
	No Operation Off	[ Disable ]

• The TV turns on again by pressing

POWER. (See page 7.)

Setup menu

MENU [Setup]

Power Control Setup Option

Selected item	Description
Off	The brightness is fi xed at the value set in
	“Backlight”.
On	Automatically adjusts
On:Display	Displays the OPC effect on the screen
	while adjusting the brightness of the
	screen.

NOTE

•Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

HPicture adjustments

Selected item	c button	d button
Backlight	The screen dims	The screen
		brightens
Contrast	For less contrast	For more contrast
Brightness	For less brightness	For more
		brightness
Colour	For less colour	For more colour
	intensity	intensity
Tint	Skin tones become	Skin tones become
	purplish	greenish
Sharpness	For less sharpness	For more
		sharpness

1Press MENU and the MENU screen displays.

2Press c/d to select “Audio”.

3Press a/b to select the desired menu item. Press ENTER to proceed if necessary.

4Press a/b or c/d to select the desired item or adjust the item to the desired level. Press ENTER if necessary.

HAudio adjustments

Selected item	c button	d button
Treble	For weaker treble	For stronger treble
Bass	For weaker bass	For stronger bass
Balance	Decrease audio	Decrease audio
	from the right	from the left
	speaker	speaker

HSurround

When you set to “On”, you can enjoy surround sound, the same as if you were in a movie theatre.

Selected item	Description
On	Makes it possible to enjoy natural, realistic
	surround sound.
Off	Outputs the normal sound.

1Press MENU and the MENU screen displays.

2Press c/d to select “Power Control”.

3Press a/b to select “No Signal Off” or “No Operation Off”, and then press ENTER.

4Press a/b or c/d to select the desired item. Press ENTER if necessary.

HNo Signal Off

You can set the TV to automatically power off in about 15 minutes after the TV goes into a state of receiving no programme signals, such as the end of a broadcast day. (Enable, Disable)

•Five minutes before the power shuts down, the remaining time displays every minute.

NOTE

•“Disable” is the factory preset value.

•When a TV programme fi nishes, and the TV receives signal input, this function may not operate.

HNo Operation Off

You can set the TV to automatically power off when no TV operation is performed for more than 3 hours. (30min., 3hr., Disable)

•Five minutes before the power shuts down, the remaining time displays every minute.

NOTE

• “Disable” is the factory preset value.

[ On ] [ Panorama ] [ Fixed ] [ English ]

[ West Europe ]

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

3Press a/b to select the desired menu, and then press ENTER.

4Press a/b or c/d to select the desired item. Press ENTER if necessary.

H Child Lock (TV input mode only)

Allows you to use a Password to protect certain settings from being accidentally changed.

Setting a Password

1Repeat steps 1 to 2 in Setup menu.

2Press a/b to select “Child Lock”, and then press ENTER.

3If you already set the Password, enter it here.

9 10