User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Mode | Router OSPF Config |
no area virtual-link retransmit-interval
This command configures the default retransmit interval for the OSPF virtual interface on the virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the IP address of the neighbor.
Format | no area <areaid> |
Mode | interval |
Router OSPF Config |
area virtual-link transmit-delay
This command configures the transmit delay for the OSPF virtual interface on the virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the IP address of the neighbor. The range for <seconds> is 0 to 3600 (1 hour).
Default | 1 |
Format | area <areaid> |
Mode | |
Router OSPF Config |
no area virtual-link transmit-delay
This command configures the default transmit delay for the OSPF virtual interface on the virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the IP address of the neighbor.
Format | no area <areaid> |
Mode | delay |
Router OSPF Config |
arp
This command creates an ARP entry. The value for <ipaddress> is the IP address of a device on a subnet attached to an existing routing interface. <macaddr> is a unicast MAC address for that device.
Routing Commands |
