User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

area nssa default-info-originate

This command configures the metric value and type for the default route advertised into the NSSA. The optional metric parameterspecifieds the metric of the default route and is to be in a range of 1-16777215. If no metric is specified, the default valueis ****. The metric type can be comparable (nssa-external 1) or non-comparable (nssa-external 2).

Format

area <areaid> nssa

default-info-originate [<metric>]

Mode

[{comparable non-comparable}]

Router OSPF Config

 

area nssa no-redistribute (OSPF)

This command configures the NSSA ABR so that learned external routes will not be redistributed to the NSSA.

Format

area <areaid> nssa

no-redistribute

Mode

Router OSPF Config

 

area nssa no-summary (OSPF)

This command configures the NSSA so that summary LSAs are not advertised into the NSSA

Format

area <areaid> nssa

no-summary

Mode

Router OSPF Config

 

area nssa translator-role (OSPF)

This command configures the translator role of the NSSA. A value of always will cause the router to assume the role of the translator the instant it becomes a border router and a value of candidate will cause the router to participate in the translator election process when it attains border router status

Format

area <areaid> nssa translator-role {always candi-

 

date}

Mode

Router OSPF Config

Routing Commands

9-3

202-10009-01_060204

Page 185
Image 185
NETGEAR 7300 Series user manual Area nssa default-info-originate, Area nssa no-redistribute Ospf, Area nssa no-summary Ospf