User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Slot/Port | The interface being displayed |
Type | Currently not used. |
STP State | The forwarding state of the port in the specified spanning tree |
| instance |
Port Role | The role of the specified port within the spanning tree. |
Link Status | The operational status of the link. Possible values are “Up” or |
| “Down”. |
Link Trap | The link trap configuration for the specified interface. |
show spanning-tree mst summary
This command displays summary information about all multiple spanning tree instances in the switch. On execution, the following details are displayed.
Format | show |
Mode | Privileged EXEC and User EXEC |
MST Instance ID List | List of multiple spanning trees IDs currently configured. |
For each MSTID: |
|
Associated FIDs | List of forwarding database identifiers associated with this |
| instance. |
Associated VLANs | List of VLAN IDs associated with this instance. |
show spanning-tree summary
This command displays spanning tree settings and parameters for the switch. The following details are displayed on execution of the command.
Format | show |
Mode | Privileged EXEC and User EXEC |
Spanning Tree Adminmode Enabled or disabled. | |
Spanning Tree Version | Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, |
| or IEEE 802.1d) based upon the Force Protocol Version parame- |
| ter |
Configuration Name | TConfigured name. |
Configuration Revision Level Configured value. | |
|
|
Switching Commands | |
