NETGEAR 7300 Series user manual Users name, SNMPv3 AccessMode, No users name

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Access Mode	Shows whether the operator is able to change parameters on the
	switch (Read/Write) or is only able to view them (Read Only). As
	a factory default, admin has Read/Write access and guest has
	Read Only access. There can only be one Read/Write user and up
	to five Read Only users.
SNMPv3 AccessMode	This field displays the SNMPv3 Access Mode. If the value is set
	to ReadWrite, the SNMPv3 user will be able to set and retrieve
	parameters on the system. If the value is set to ReadOnly, the
	SNMPv3 user will only be able to retrieve parameter information.
	The SNMPv3 access mode may be different than the CLI and
	Web access mode.

SNMPv3 Authentication This field displays the authentication protocol to be used for the specified login user.

SNMPv3 Encryption This field displays the encryption protocol to be used for the specified login user.

users name

This command adds a new user (account) if space permits. The account <username> can be up to eight characters in length. The name may be comprised of alphanumeric characters as well as the dash (‘-’) and underscore (‘_’). The <username> is not case-sensitive.

Six user names can be defined.

Format	users name <username>
Mode	Global Config
no users name

This command removes an operator.

Format	no users name	<username>
Mode	Global Config

Note: The admin user account cannot be deleted.

8-92 Switching Commands

202-10009-01_060204