NETGEAR 7300 Series Vlan protocol group add protocol, Vlan protocol group remove, Vlan pvid

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Mode Global Config

vlan protocol group add protocol

This command adds the <protocol> to the protocol-based VLAN identified by <groupid>. A group may have more than one protocol associated with it. Each interface and protocol combination can only be associated with one group. If adding a protocol to a group causes any conflicts with interfaces currently associated with the group, this command will fail and the protocol will not be added to the group. The possible values for protocol are ip, arp, and ipx.

Default	none
Format	vlan protocol group add protocol <groupid> <protocol>
Mode	Global Config

no vlan protocol group add protocol

This command removes the <protocol> from this protocol-based VLAN group that is identified by this <groupid>. The possible values for protocol are ip, arp, and ipx.

Format	no vlan protocol group add protocol <groupid> <proto-
Mode	col>
	Global Config

vlan protocol group remove

This command removes the protocol-based VLAN group that is identified by this <groupid>.

Format	vlan protocol	group remove <groupid>
Mode	Global Config

vlan pvid

This command changes the VLAN ID per interface.

Default	1
Format	vlan pvid <1-4094>
Mode	Interface Config

8-76 Switching Commands

202-10009-01_060204