User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Mode

Privileged EXEC

network protocol

This command specifies the network configuration protocol to be used. If you modify this value change is effective immediately.

Default

None

Format

network protocol {none bootp dhcp}, where bootp

 

indicates that the switch periodically sends requests to a Boot-

 

strap Protocol (BootP) server or a dhcp server until a response is

 

received. none indicates that the switch should be manually con-

 

figured with IP information.

Mode

Privileged EXEC

remotecon maxsessions

This command specifies the maximum number of remote connection sessions that can be established. A value of 0 indicates that no remote connection can be established. The range is 0 to 5.

Default

5

Format

remotecon maxsessions <0-5>

Mode

Privileged EXEC

no remotecon maxsessions

This command sets the maximum number of remote connection sessions that can be established to the default value.

Default

5

Format

no remotecon maxsessions

Mode

Privileged EXEC

Switching Commands

8-21

202-10009-01_060204

Page 87
Image 87
NETGEAR 7300 Series user manual Network protocol, Remotecon maxsessions, No remotecon maxsessions