NETGEAR 7300 Series Device Configuration Commands, Ip ssh protocol, Show ip ssh, Addport

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

no ip ssh

This command is used to disable SSH.

Format	no ip ssh
Mode	Privileged EXEC

ip ssh protocol

This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.

Default	1 and 2
Format	ip ssh protocol [1] [2]
Mode	Privileged EXEC

show ip ssh

This command displays the ssh settings.

Format	show ip ssh
Mode	Privileged EXEC

Administrative Mode	This field indicates whether the administrative mode of SSH is
	enabled or disabled.
Protocol Level	The protocol level may have the values of version 1, version 2 or
	both versions 1 and version 2.

Connections This field specifies the current ssh connections.

Device Configuration Commands

addport

This command adds one port to the port-channel (LAG). The first interface is a logical slot and port number of a configured port-channel.

Note: Before adding a port to a port-channel, set the physical mode of the port. See ‘speed’ command.

8-38 Switching Commands

202-10009-01_060204