
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
area nssa translator-stab-intv
This command configures the translator stability interval of the NSSA. The stabilityinterval is the period of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router.
Format | area <areaid> nssa |
| interval> |
Mode | Router OSPF Config |
area range
This command creates a specified area range for a specified NSSA. The <ipaddr> is a valid IP address. The <subnetmask> is a valid subnet mask. The lsdb type must be specified by either summarylink or nssaexternallink, and the advertising of the area range can be optionally allowed or suppressed.
Format | area <areaid> range <ipaddr> <subnetmask> {summa- |
| rylink nssaexternallink} |
Mode | Router OSPF Config |
no area range |
|
This command deletes a specified area range.
The <ipaddr> is a valid IP address.
The <subnetmask> is a valid subnet mask.
Format | no area <areaid> range <ipaddr> <subnetmask> |
Mode | Router OSPF Config |
area stub
This command creates a stub area for the specified area ID. A stub area is characterized by the fact that AS External LSAs are not propagated into the area. Removing AS External LSAs and Summary LSAs can significantly reduce the link state database of routers within the stub area.
Format | area <areaid> stub |
Mode | Router OSPF Config |
|
|
Routing Commands |