NETGEAR 7300 Series user manual Appendix a Is CLI Mapping

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Appendix A

IS CLI Mapping

This chapter illustrates the mapping between CLI commands and the previous 7300 Series L3 Switch commands. The Package column indicates the 7300 Series L3 Switch package in which the command is located.

Table 13-2.	IS CLI Mapping
Package	7300 Series L3 Switch Command	CLI Command
		Mode	Syntax
QOS	show acl detailed <aclid>	Privileged	show ip access-lists [<1-199>]
		EXEC
QOS	show acl summary	Privileged
		EXEC and
		User
		EXEC
QOS	config acl create <aclid>	Global	access-list {(<1-99> {deny permit}
		Config	<srcip> <srcmask>) ( {<100-199>
			{deny permit} {every {{icmp igmp
			ip tcp udp <number>} <srcip>
			<srcmask> [{eq {<0-65535>
			<portkey>} range <startport>
			<endport>}] <dstip> <dstmask> [{eq
			{<0-65535> <portkey>} range
			<startport> <endport>}] {[precedence
			<precedence>] [tos <tos>
			<tosmask>] [dscp <dscp>]}}}})}
QOS	config acl delete <aclid>	Global	no access-list {<1-99> <100-199>}
		Config
QOS	config acl rule create <aclid>
	<rulenum>
QOS	config acl rule delete <aclid>
	<rulenum>
IS CLI Mapping			A-1

202-10009-01_060204