User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
ip ospf hello-interval
This command sets the OSPF hello interval for the specified interface.
The value for <seconds> is a valid positive integer, which represents the length of time in seconds. The value for the length of time must be the same for all routers attached to a network.
Valid values range from 1 to 65535.
Default | 10 |
Format | ip ospf |
Mode | Interface Config |
no ip ospf |
|
This command sets the default OSPF hello interval for the specified interface.
Format | no ip ospf |
Mode | Interface Config |
ip ospf priority
This command sets the OSPF priority for the specified router interface. The priority of the interface is a priority integer from 0 to 255.
A value of '0' indicates that the router is not eligible to become the designated router on this network.
Default | 1, which is the highest router priority. |
Format | ip ospf priority |
Mode | Interface Config |
no ip ospf priority |
|
This command sets thedefault OSPF priority for the specified router interface.
Format | no ip ospf priority |
Mode | Interface Config |
Routing Commands |
