NETGEAR 7300 Series user manual Show port-channel

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Group Name	This field displays the group name of an entry in the Protocol-
	based VLAN table.
Group ID	This field displays the group identifier of the protocol group.
Protocol(s)	This field indicates the type of protocol(s) for this group.
VLAN	This field indicates the VLAN associated with this Protocol
	Group.
Interface(s)	This field lists the slot/port interface(s) that are associated with
	this Protocol Group.

show port-channel

This command displays an overview of all port-channels (LAGs) on the switch.

Format	show port-channel {<logical slot/port> all}
Mode	Privileged EXEC
Logical slot/port	The logical slot and the logical port.
Name	The name of this port-channel (LAG). You may enter any string
	of up to 15 alphanumeric characters.
Link State	Indicates whether the Link is up or down.
Admin Mode	May be enabled or disabled. The factory default is enabled.
Link Trap Mode	This object determines whether or not to send a trap when link
	status changes. The factory default is enabled.
STP Mode	The Spanning Tree Protocol Administrative Mode associated
	with the port or port-channel (LAG). The possible values are:
	Disable - Spanning tree is disabled for this port.
	Enable - Spanning tree is enabled for this port.
Mbr Ports	A listing of the ports that are members of this port-channel
	(LAG), in slot/port notation. There can be a maximum of eight
	ports assigned to a given port-channel (LAG).
Port Speed	Speed of the port-channel port.
Type	This field displays the status designating whether a particular
	port-channel (LAG) is statically or dynamically maintained. The
	possible values of this field are Static, indicating that the port-
	channel is statically maintained; and Dynamic, indicating that the
	port-channel is dynamically maintained.
8-62	Switching Commands

202-10009-01_060204