
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
set garp timer leave
This command sets the GVRP leave time per port. Leave time is the time to wait after receiving an unregister request for a VLAN or a multicast group before deleting the VLAN entry. This can be considered a buffer time for another station to assert registration for the same attribute in order to maintain uninterrupted service.time is 20 to 600 (centiseconds).
Note: This command has an effect only when GVRP is enabled.
Default | 60 centiseconds (0.6 seconds) |
Format | set garp timer leave |
Mode | Interface Config |
no set garp timer leave |
|
This command sets the GVRP leave time per port to 60 centiseconds (0.6 seconds). Note: This command has an effect only when GVRP is enabled.
Format | no set garp timer leave |
Mode | Interface Config |
set garp timer leave all
This command sets the GVRP leave time for all ports. Leave time is the time to wait after receiving an unregister request for a VLAN or a multicast group before deleting the VLAN entry. This can be considered a buffer time for another station to assert registration for the same attribute in order to maintain uninterrupted service.time is 20 to 600 (centiseconds).
Note: This command has an effect only when GVRP is enabled.
Default | 60 centiseconds (0.6 seconds) |
Format | set garp timer leave all |
Mode | Global Config |
no set garp timer leave all |
|
This command sets the GVRP leave time for all ports to the default 60 centiseconds (0.6 seconds).
Note: This command has an effect only when GVRP is enabled.
Format | no set garp timer leave all |
|
|
Switching Commands |