
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Hello Interval | Is the configured hello interval for the OSPF virtual interface. |
Dead Interval | Is the configured dead interval for the OSPF virtual interface. |
Iftransit Delay Interval | Is the configured transit delay for the OSPF virtual interface. |
Retransmit Interval | Is the configured retransmit interval for the OSPF virtual inter- |
| face. |
Authentication Type | Is the configured authentication type of the OSPF virtual inter- |
| face. |
State | The OSPF Interface States are: down, loopback, waiting, point- |
| |
| the state of the OSPF interface. |
Neighbor State | Displays the neighbor state. |
show ip ospf virtual-link brief
This command displays the OSPF Virtual Interface information for all areas in the system.
Format | show ip ospf |
Mode | Privileged EXEC and User EXEC |
Area Id | Is the area id of the requested OSPF area. |
Neighbor | Is the neighbor interface of the OSPF virtual interface. |
Hello Interval | Is the configured hello interval for the OSPF virtual interface. |
Dead Interval | Is the configured dead interval for the OSPF virtual interface. |
Retransmit Interval | Is the configured retransmit interval for the OSPF virtual inter- |
| face. |
Transit Delay | Is the configured transit delay for the OSPF virtual interface. |
show ip rip
This command displays information relevant to the RIP router.
Format | show ip rip |
Mode | Privileged EXEC and User EXEC |
Router ID | Is a 32 bit dotted decimal number representing the interface. |
Routing Commands |