
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
show ip ospf database
This command displays the link state database. This command takes no options. The information below will only be displayed if OSPF is enabled.
Format | show ip ospf database |
Mode | Privileged EXEC and User EXEC |
Router ID | Is a 32 bit dotted decimal number representing the LSDB inter- |
| face. |
Area ID | Is the IP address identifying the router ID. |
LSA Type | The types are: router, network, ipnet sum, asbr sum, as external, |
| group member, tmp 1, tmp 2, opaque link, opaque area. |
LS ID | Is a number that "uniquely identifies an LSA that a router origi- |
| nates from all other self originated LSA's of the same LS type." |
Age | Is a number representing the age of the link state advertisement in |
| seconds. |
Sequence | Is a number that represents which LSA is more recent. |
Checksum | Is to total number LSA checksum. |
Options | This is an integer. It indicates that the LSA receives special han- |
| dling during routing calculations. |
show ip ospf interface
This command displays the information for the IFO object or virtual interface tables.
Format | show ip ospf interface <slot/port> |
Mode | Privileged EXEC and User EXEC |
IP Address | Represents the IP address for the specified interface. This is a |
| configured value. |
Subnet Mask | Is a mask of the network and host portion of the IP address for the |
| OSPF interface. This value was configured into the unit. This is a |
| configured value. |
OSPF Admin Mode | States whether OSPF is enabled or disabled on a router interface. |
| This is a configured value. |
OSPF Area ID | Represents the OSPF Area Id for the specified interface. This is a |
| configured value. |
|
|
Routing Commands |