User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Component | The component that is responsible for this entry in the Multicast |
| Forwarding Database. Possible values are IGMP Snooping, |
| GMRP, and Static Filtering. |
Description | The text description of this multicast table entry. |
Interfaces | The list of interfaces that are designated for forwarding (Fwd:) |
| and filtering (Flt:). |
Forwarding Interfaces The resultant forwarding list is derived from combining all the component’s forwarding interfaces and removing the interfaces that are listed as the static filtering interfaces.
show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. If <all> is selected, all the Static MAC Filters in the system are displayed. If a macaddr is entered, a vlan must also be entered and the Static MAC Filter information will be displayed only for that MAC address and VLAN.
Format | show |
Mode | all} |
Privileged EXEC | |
MAC Address | Is the MAC Address of the static MAC filter entry. |
VLAN ID | Is the VLAN ID of the static MAC filter entry. |
Source Port(s) | Indicates the source port filter set's slot and port(s). |
Destination Port(s) | Indicates the destination port filter set's slot and port(s). |
show mac-address-table staticfiltering
This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB) table.
Format | show |
Mode | Privileged EXEC |
Mac Address | A unicast MAC address for which the switch has forwarding and |
| or filtering information. The format is 6 or 8 |
| mal numbers that are separated by colons, for example |
| 01:23:45:67:89:AB. In an IVL system the MAC address will be |
|
|
Switching Commands |
