no split-horizon Router RIP Config
no split-horizon
This command sets the default RIP split horizon mode.
Default
Format
Mode
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
split-horizon
This command sets the RIP split horizon mode. simple
Format
Mode
trapflags
This command enables OSPF traps.
Default | Enabled |
Format | trapflags |
Mode | Router OSPF Config |
no trapflags
This command disables OSPF traps.
Format | no trapflags |
Mode | Router OSPF Config |
vlan routing
This command creates routing on a VLAN. The <vlanid> value has a range from 1 to 4094.
Format | vlan routing <vlanid> |
Mode | VLAN Database |
no vlan routing |
|
This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 4094.
Routing Commands |