User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-96 Switching Commands
202-10009-01_060204
Format no authentication login <listname>
Mode Global Config
clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
Format clear dot1x statistics {<slot/port> | all}
Mode Privileged EXEC
clear radius statistics
This command is used to clear all RADIUS statistics.
Format clear radius statistics
Mode Privileged EXEC
dot1x defaultlogin
This command assigns the authentication login list to use for non-configured users for 802.1x port
security. This setting is over-ridden by the authentication login list assigned to a specific user if the
user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Format dot1x defaultlogin <listname>
Mode Global Config
dot1x initialize
This command begins the initialization sequence on the specified port. This command is only valid
if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be
returned.
Format dot1x initialize <slot/port>
Mode Privileged EXEC