User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
logical slot/port This parameter denotes a logical slot number and logical port number assigned. This is applicable in the case of a
Conventions
Network addresses are used to define a link to a remote host, workstation or network. Network addresses are shown using the following syntax:
Table | Network Address Syntax |
| |
|
|
|
|
Address Type |
| Format | Range |
|
|
|
|
ipaddr |
| A.B.C.D | 0.0.0.0 to 255.255.255.255 |
|
|
| (decimal) |
macaddr |
| YY:YY:YY:YY:YY:YY | hexidecimal digit pairs |
Double quotation marks such as "System Name with Spaces" set off user defined strings. If the operator wishes to use spaces as part of a name parameter then it must be enclosed in double quotation marks.
Empty strings (““) are not valid user defined strings.
Command completion finishes spelling the command when enough letters of a command are typed to uniquely identify the command word. The command may be executed by typing <enter> (command abbreviation) or the command word may be completed by typing the <tab> or <space bar> (command completion).
The value 'Err' designates that the requested value was not internally accessible. This should never happen and indicates that there is a case in the software that is not handled correctly.
The value of
Command Line Interface Structure |
