User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

The current value for this function is displayed under "show ip interface" labeled as "Routing Mode".

Default

Disabled

Format

routing

Mode

Interface Config

no routing

 

This command disables routing for an interface.

The current value for this function is displayed under "show ip interface" labeled as "Routing Mode".

Format

no routing

Mode

Interface Config

show arp

This command displays the Address Resolution Protocol (ARP) cache. The displayed results are not the total ARP entries. To view the total ARP entries, the operator should view the show arp results in conjunction with the show arp switch results.

Format

show arp

Mode

Privileged EXEC

Age Time (seconds)

Is the time it takes for an ARP entry to age out. This value was

 

configured into the unit. Age time is measured in seconds.

Response Time (seconds) Is the time it takes for an ARP request timeout. This value was configured into the unit. Response time is measured in sec- onds.

Retries

Is the maximum number of times an ARP request is retried. This

 

value was configured into the unit.

Cache Size

Is the maximum number of entries in the ARP table. This value

 

was configured into the unit.

Dynamic Renew Mode Displays whether the ARP component automatically attempts to renew dynamic ARP entries when they age out.

Total Entry Count Current / Peak Field listing the total entries in the ARP table and the

peak entry count in the ARP table.

Routing Commands

9-35

202-10009-01_060204

Page 217
Image 217
NETGEAR 7300 Series user manual Show arp, No routing, Age Time seconds, Retries, Cache Size