
11Useful adjustment settings
Note
•If you fail to enter the correct password three times, "Invalid password." appears, and the menu is closed. In order to display the password entry screen again to unlock the password, select the blocked channel or open the menu again.
•If the password entry screen disappears before entry, you may recall it by pressing ENTER.
Changing the password
Use the following procedure to change the password.
1Press HOME MENU.
2Select “Setup“ (/ then ENTER).
3Select “Password“ (/ then ENTER).
The password entry screen appears. Enter the current
4Select “Change Password“ (/ then ENTER).
5Enter a
0to 9.
Change Password
Please Input New Password.
Reconfirm New Password.
6Enter the same password that you have entered in step 5.
•If a different password is entered, the operation goes back to step 5 for reentry from the beginning.
•You can try up to three times to reconfirm the new password before the Change Password screen is automatically exited.
7Press HOME MENU to exit the menu.
Note
• Take a note of the newly set password and keep it handy.
Resetting the password function
1Press HOME MENU.
2Select “Setup“ (/ then ENTER).
3Select “Password“ (/ then ENTER).
The password entry screen appears. Enter your
4Select “Reset“ (/ then ENTER).
5Select “Yes“ (/ then ENTER).
6Press HOME MENU to exit the menu.
Note
•The above procedure will reset the password to the factory default (1 2 3 4).
Disabling the password function
Use the following procedure if you want to deactivate the protection function that prompts password entry.
1Press HOME MENU.
2Select “Setup“ (/ then ENTER).
3Select “Password“ (/ then ENTER).
The password entry screen appears. Enter your
4Select “Password Setting“ (/ then ENTER).
5Select “Disable“ (/ then ENTER).
6Press HOME MENU to exit the menu.
Note
•The above procedure will reset the password to the factory default (1 2 3 4).
•After disabling the password function, you cannot change the Child Lock settings (see Setting Child Lock on page 26).
•After disabling the password function, you cannot change or reset the password.
•When you enable the password function again after disabling it, the factory default password (1 2 3 4) is restored.
We suggest you write down your password so you don't forget it.
PDP-4270XD
Your password No.:
If you forget the password
When the message "Please Input Your Password." is displayed, press the ENTER button on the remote control unit and hold it down
for 3 seconds or longer. The password reverts to "1234".
Note that it is not possible to reset the password from the DTV Setup screen.
48
En