12Using with other equipment
3Select the type of digital video signals (/ then ENTER).
•If you select “Auto", an attempt will be made to identify the type of digital video signals when digital video signals are received.
Item | Description |
Auto (default) | Automatically identifies input digital video signals. |
|
|
Digital Component Video signals (4:2:2) locked | |
|
|
Digital Component Video signals (4:4:4) locked | |
|
|
Digital RGB signals locked | |
|
|
4 Press HOME MENU to exit the menu.
Note
•If you select a parameter other than "Auto", make such a setting that results in natural colour.
•If no image appears, specify another digital video signal type.
•For the digital video signal types to be specified, check the operation manual that came with the connected equipment.
Using i/o link.A
The plasma television incorporates three typical i/o link.A functions for smooth connections between plasma television and other audiovisual equipment.
One Touch Play
While the plasma television is in standby mode, it automatically turns on and plays back images from the audiovisual source (e.g. VCR, DVD).
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers channel preset information from the tuner on the plasma television to the one on the connected audiovisual equipment (e.g. VCR) via the INPUT 2 or 3 terminal.
To specify the type of audio signals:
1Repeat steps 1 to 3 provided for “Activating the HDMI terminal“.
2Select “Audio“ (/ then ENTER).
3Select the type of audio signals (/ then ENTER).
•If you select "Auto", an attempt will be made to identify the type of audio signals when audio signals are received.
Item | Description |
Auto (default) | Automatically identifies the input signals. |
|
|
Digital | Accepts digital audio signals. |
|
|
Analogue | Accepts analogue audio signals. |
|
|
4 Press HOME MENU to exit the menu.
Note
•If no sound is output, specify another audio signal type.
•For the audio signal types to be specified, check the operation manual that came with the connected equipment.
•Depending on the equipment to be connected, you also need to connect analogue audio cables.
Selecting the SCART terminal for use with i/o link.A
The plasma television inputs 2 and 3 are available for use with i/o link.A. Select which is to be used.
1Press HOME MENU.
2Select “Setup” (/ then ENTER).
3Select “i/o link.A” (/ then ENTER).
4Select a setting (/ then ENTER).
Item Description
INPUT 2 (default) INPUT 2 is available for i/o link.A.
INPUT 3 | INPUT 3 is available for i/o link.A. |
|
|
Note
•The i/o link.A functions work only when the audiovisual equipment is connected to the INPUT 2 or 3 terminal on the plasma television with i/o link.A via a fully wired
•Refer to operation manuals of each external equipment for the details.
•If a SCART cable has been connected to the INPUT 3 terminal with the i/o link.A activated, input signals (other than Component) are automatically identified and displayed. If the i/o link.A has been deactivated, Video is always selected for signals other than RGB because the system cannot identify among RGB, Y/C
52
En
