Using with other equipment
Connecting an amplifier/AV receiver
You can enjoy more powerful sound by connecting an amplifier or AV receiver to the plasma television.
12
Note | English |
| |
• PC signals are not compatible with the HDMI terminal. |
|
• It may take a short while until the image is displayed, depending |
|
on the equipment connected. |
|
Rear view
Connecting HDMI equipment
3 |
|
| Optical digital |
| audio cable |
Stereo | Amplifier/AV receiver |
audio cable |
|
Note
• For details, refer to the operation manual for the audio equipment |
to be connected. |
• Audio signals synchronizing with currently displayed images are |
always output to the AUDIO OUTPUT terminals. |
Rear view
SCART cable 
(for analogue audio)
3
HDMI cable carrying the HDMI mark
• While in DTV mode, no signals are output if they are copy guarded. |
HDMI device
Using the HDMI Input
The INPUT 3 terminals include an HDMI terminal to which digital video and audio signals can be input. To use the HDMI terminal, activate the terminal and specify the types of video and audio signals to be received from the connected equipment. For the types of these signals, see the operation manual that came with the connected equipment.
Before starting the menu, press INPUT 3 on the remote control unit or press INPUT on the plasma television to select INPUT 3.
Input signal table
1920 x 1080i@50 Hz
720 x 576p@50 Hz
1280 x 720p@50 Hz
720(1440) x 576i@50 Hz
1920 x 1080i@59.94 Hz/60 Hz
720 x 480p@59.94 Hz/60 Hz
1280 x 720p@59.94 Hz/60 Hz
720(1440) x 480i@59.94 Hz/60 Hz
1920 x 1080p@24 Hz
For audio, the system supports the following:
•Linear PCM (STEREO 2ch)
•Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Activating the HDMI terminal
1Press HOME MENU.
2Select “Option“ (/ then ENTER).
3Select “HDMI Input“ (/ then ENTER).
4Select “Setting“ (/ then ENTER).
5Select “Enable“ (/ then ENTER).
Item Description
Disable (default) Deactivates the HDMI terminal.
Enable | Activates the HDMI terminal. |
|
|
6 Press HOME MENU to exit the menu.
To specify the type of digital video signals:
1Repeat steps 1 to 3 provided for “Activating the HDMI terminal“.
2Select “Video“ (/ then ENTER).
51
En
