Setting up | 08 |
Note
•You cannot adjust the front surround effect for listening with headphones.
•If you change the front surround effect with headphones connected, the new setting will become effective as soon as you disconnect the headphones.
•
(WOW) designates a status where the FOCUS is on and TruBass + SRS has been selected for Front Surround.
•
is a trademark of SRS Labs, Inc.
•WOW technology is incorporated under license from SRS Labs, Inc.
•The effect of this function differs depending on signals.
Power Control
Power Control provides convenient functions for power saving.
Energy Save
You may use one of the three Energy Save modes to save power consumption.
1Press HOME MENU.
2Select “Power Control“ (/ then ENTER).
3Select “Energy Save“ (/ then ENTER).
4Select “Save1“, “Save 2“, or “Picture Off“ (/ then ENTER).
Energy Save
Selections | Standard | Does not decrease the picture brightness. |
|
|
|
| Save1 | Slightly lowers power consumption while |
|
| slightly suppressing the brightness drop level. |
|
|
|
| Save2 | Decreases the picture brightness and lowers |
|
| power consumption. |
|
|
|
| Picture Off | Deactivates the screen to save power. To |
|
| restore the screen display, press any button |
|
| other than i+/i– and e. |
|
| This setting is not memorized by the system. |
|
|
|
5 Press HOME MENU to exit the menu.
Note
•When you change the Energy Save mode, you may notice a change in the panel sound. This is normal.
No Signal off
The system will be automatically placed into the standby mode if no signal is received for 15 minutes.
1Press HOME MENU.
2Select “Power Control“ (/ then ENTER).
3Select “No Signal off“ (/ then ENTER).
4Select “Enable“ (/ then ENTER).
No Signal Off
Selections | Disable (default) | Does not place the system into the standby |
|
| mode. |
|
|
|
| Enable | Places the system into the standby mode if no |
|
| signal is received for 15 minutes. |
|
|
|
5 Press HOME MENU to exit the menu.
Note
•Five minutes before the system is placed into the standby mode, a message appears every minute.
•The system may not be placed into the standby mode when noise signals are present at the plasma television after a TV programme finishes.
No Operation off
The system will be automatically placed into the standby mode when no operation is performed for three hours.
1Press HOME MENU.
2Select “Power Control“ (/ then ENTER).
3Select “No Operation off“ (/ then ENTER).
4Select “Enable“ (/ then ENTER).
No Operation Off
Selections | Disable (default) | Does not place the system into the standby |
|
| mode. |
|
|
|
| Enable | Places the system into the standby mode if no |
|
| operation is performed for three hours. |
|
|
|
5 Press HOME MENU to exit the menu.
Note
•Five minutes before the system is placed into the standby mode, a message appears every minute.
English
33
En
