08Setting up
11Select “Colour System“ (/).
12Select a colour system (/).
You can select from among "Auto", "PAL", "SECAM", and "4.43NTSC".
| Search | 42.75MHz |
|
|
|
|
|
| System | B/G |
|
|
|
|
|
| Colour System | Auto |
|
|
|
|
|
| Store | No |
|
13Select “Store“ (/).
14Select “Yes“, “Yes (Listed)“, or “No“ (/).
System | B/G |
Colour System | Auto |
|
|
Store | Yes |
|
|
Tuner NR | On |
|
|
Child Lock | View |
|
|
Item | Description |
Yes | You can select the channel using P+ / |
|
|
Yes (Listed) | Select this option to register the channel as your favourite |
| channel. |
| You can select the channel using the Favourite Channel list |
| and P+ / |
|
|
No | You cannot select the channel using P+ / |
|
|
15Press HOME MENU to exit the menu.
•Alternatively, to set up for another channel, repeat steps 6 to 14.
Note
•The above procedure transfers and sets the selected channel information to the connected recording equipment such as a VCR or DVD/HDD recorder (DVR).
•Manual Adjust also allows you to make selections for "Tuner NR", "Child Lock", and "Decoder". See Reducing video noise, Setting Child Lock, and Selecting a decoder input terminal below.
Reducing video noise
For the individual channels, you can specify whether the plasma television should reduce video noise depending on the levels of broadcasting signals.
1Repeat steps 1 to 6 provided for “Setting up analogue TV channels manually“.
After selecting a channel (using Programme Entry), perform the following steps:
2Select “Tuner NR“ (/).
3Select “On“ or “Off“ (/).
Colour System | Auto |
Store | Yes |
|
|
Tuner NR | On |
|
|
Child Lock | View |
|
|
Decoder | Off |
4 Press HOME MENU to exit the menu.
Note
•This function may not achieve a satisfactory result, depending on the conditions of broadcasting signals.
•When using a decoder with a decoder terminal selected, this function may fail to achieve a good result.
Setting Child Lock
Child Lock inhibits selected TV channels from being tuned and watched.
1Repeat steps 1 to 6 provided for “Setting up analogue TV channels manually“.
After selecting a channel (using Programme Entry), perform the following steps:
2Select “Child Lock“ (/).
3Select “Block“ (/).
Tuner NR | On |
Child Lock | Block |
|
|
Decoder | Off |
•The selection is switched between "View" and "Block".
4 Press HOME MENU to exit the menu.
26
En
