User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
no area stub
This command deletes a stub area for the specified area ID.
Format | no area <areaid> stub |
Mode | Router OSPF Config |
area stub summarylsa
This command configures the Summary LSA mode for the stub area identified by <areaid>. The Summary LSA mode is configured as enabled.
Default | Disabled |
Format | area <areaid> stub summarylsa |
Mode | Router OSPF Config |
no area stub summarylsa |
|
This command configures the default Summary LSA mode for the stub area identified by <areaid>.
Format | no area <areaid> stub summarylsa |
Mode | Router OSPF Config |
area virtual-link
This command creates the OSPF virtual interface for the specified <areaid> and <neighbor>. The <neighbor> parameter is the IP address of the neighbor.
Format | area <areaid> |
Mode | Router OSPF Config |
no area |
|
This command deletes the OSPF virtual interface from the given interface, identified by <areaid> and <neighbor>. The <neighbor> parameter is the IP address of the neighbor.
Format | no area <areaid> |
Mode | Router OSPF Config |
|
|
Routing Commands |
