NETGEAR 7300 Series Set gmrp adminmode, Set gmrp interfacemode, No set garp timer leaveall all

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

no set garp timer leaveall all

This command sets how frequently Leave All PDUs are generated for all ports to 1000 centiseconds (10 seconds).

Note: This command has an effect only when GVRP is enabled.

Format	no set	garp timer leaveall all
Mode	Global	Config

set gmrp adminmode

This command enables GARP Multicast Registration Protocol (GMRP) on the system. The default value is disable.

Format	set gmrp adminmode
Mode	Privileged EXEC
no set gmrp adminmode

This command disables GARP Multicast Registration Protocol (GMRP) on the system.

Format	no set gmrp adminmode
Mode	Privileged EXEC

set gmrp interfacemode

This command enables GARP Multicast Registration Protocol on a selected interface. If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a port- channel (LAG), GARP functionality will be disabled on that interface. GARP functionality will subsequently be re-enabled if routing is disabled and port-channel (LAG) membership is removed from an interface that has GARP enabled.

Default	Disabled
Format	set gmrp interfacemode
Mode	Interface Config

8-48 Switching Commands

202-10009-01_060204