Setting the Controller to Operate a Cable Box 43
•If you use a Cable Box, you must set the clock manually. Details are on page 14.
•Complete the steps on page 27 before proceeding. This will enable you to use the VCR remote control to operate the Cable Box, and you will learn your Cable Box code.
•Make each entry within one minute of the previous entry.
Turn on the Cable Box. Set it
1 tonela9.channel other than chan-
1
Turn on the Cable Box. Select a channel other than 09.
2
Press the VCR button, then press the MENU button.
3
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1 SET REPEAT PLAY (OFF)
2ON SCREEN MODE
3LANGUAGE
4SET VCR PLUS+ CH
5SET CABLE BOX
6SET DSS RECEIVER
7AUDIO OUT
8 VIDEO STABILIZER (OFF) TO END PUSH EXIT
4
Press the Number 5 button to select SET CABLE BOX.
CABLE BOX CONTROLLER
OFF
TO SELECT PRESS NUMBER
1ON
2OFF
TO CONTINUE PUSH MENU
TO END PUSH EXIT
5
Press the Number 1 button to set the Cable Box Controller to ON.
CABLE BOX CONTROLLER
ON
TO SELECT PRESS NUMBER
1ON
2OFF
TO CONTINUE PUSH MENU
TO END PUSH EXIT
6
Press the MENU button.
SELECT CODE NUMBER
OF YOUR CABLE BOX
TO END PUSH EXIT
Instructions continue on page 44.
| CBL/DSS | VCR | TV | 2 |
| EJECT | POWER | MUTE |
|
| VOL | F.ADV | CHANNEL |
|
|
|
|
| |
| PAUSE/STILL |
|
| |
|
| PLAY |
|
|
| REW |
| FF |
|
| VCR PLUS+ |
| LIGHT |
|
| /ENTER |
|
| |
|
| STOP |
|
|
6 EXIT/STATUS MENU | CLEAR | 3 | ||
5 | 1 | 2 | 3 | |
4 | 5 | 6 | ||
| 7 | 8 | 9 | 4 |
| 100 | 0 |
| |
REC/OTR | INDEX | MEMORY |
| ... |
|
| ... |
|
| VAR. SLOW | TRACKING SKIP |
SPEED VCR/TV SLOW | SEARCH | |
REMOTE LOCATOR
Helpful Hints
•If the EXIT/STATUS button is pressed during steps 6 - 9, “CABLE BOX CONTROL IS OFF” will appear
•If the remote control does not oper- ate the Cable Box, the Controller will not change channels at the Cable Box during a timer recording. In this case, you must select the channel to be recorded at the Cable Box before a timer recording begins. Leave the Cable Box on for the
