Philips VCR 462 warranty Timer Recording cont’d, Tape Speeds

36 Timer Recording (cont’d)

8

Press the Number 1 button to record in SP speed. Press the Number 2 button to record in SLP speed. You cannot use the (Tape) SPEED button at this time.

ONE TIME PROGRAM

PROGRAM	1
CHANNEL	10 CABLE/TV
TIME ON	09:30 PM
TIME OFF	11:00 PM
REC SPEED	SLP

SP=1 SLP=2

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

9

Press two Number buttons for the month and two Number buttons for the day you want the program to record. For example, for July 10, press 07, 10. The day of the week and the year will appear automatically. (You cannot program the VCR to record more than one year in advance.)

ONE TIME PROGRAM

PROGRAM	1
CHANNEL	10 CABLE/TV
TIME ON	09:30 PM
TIME OFF	11:00 PM
REC SPEED	SLP

START DATE 07/10/97

THU.

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

10

Press the EXIT/STATUS button. PROGRAM WAS COM- PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING will appear on-screen. In three seconds, the message will disappear. (If PROGRAM NOT COMPLETED appears, try again from step 1. If PROGRAM NOT COMPLETED/CLASH appears, the timer recording you just programmed overlaps with an earlier timer recording. The timer recording you just programmed will not take place.)

11

Press the POWER button to turn off the VCR. The TIMER light will appear on the display panel. (The TIMER light and the Cassette-Inside light will flash if there is not a tape in the VCR.)

The VCR must be turned off for a timer recording to take place. If you forget to turn off the VCR, PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording starts. To remove the message, press the CLEAR button.

CBL/DSS VCR TV

EJECT POWER MUTE

11 VOL F.ADV CHANNEL

		PAUSE/STILL
		PLAY
	REW		FF
	VCR PLUS+		LIGHT
	/ENTER
		STOP
10 EXIT/STATUS MENU			CLEAR
8	1	2	3	9
	4	5	6
	7	8	9
	100	0	GO-TO
	REC/OTR	INDEX	MEMORY
		...
		...
		VAR. SLOW	TRACKING	SKIP
	SPEED VCR/TV SLOW			SEARCH

REMOTE LOCATOR

The VCR must be

off for a timer

recording to occur. Make sure the VCR has a tape.

	Tape Speed	Maximum Record/Playback Time
Tape Speeds
This chart shows the recording/playback time		T160	T120	T60
for T160, T120, and T60 video cassettes.	SP	2 hrs.	2 hrs.	1 hr.
There are three playback speeds: SP, LP, and	(Standard Play)	40 mins.
SLP. This VCR will play tapes recorded in LP,	LP	5 hrs.	4 hrs.	2 hrs.
but LP will not appear on the display panel.	(Long Play)	20 mins.
This VCR will only record in SP and SLP.
	SLP	8 hrs.	6 hrs.	3 hrs.
	(Super Long Play)