Philips VCR 462 Turning on Your VCR, VCR will come on and the menu shown below will appear

10 Turning on Your VCR

Before turning on your VCR, make sure there are batteries in the remote control. Details are on page five. Make sure the VCR, TV, and Cable Box/DSS Receiver (if applicable) are connected. Details are on pages six - nine. If you are going to set up the Controller now, connect the Controller before you begin. Details are on page 42. If you plan to set up the VCR Plus+ Programming System now, complete the charts on page 38 before you begin.

1

Turn on the TV. Set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

2

Press the VCR button, then press the POWER button.

The VCR will come on and the menu shown below will appear.

TO SELECT PUSH NO. SHOWN

1	ENGLISH	(ON)
2	ESPAÑOL

MAKE SELECTION OR

PUSH MENU TO CONTINUE

3

Press the Number 1 button to select English on-screen dis- plays. (ON) will appear to the right of ENGLISH on-screen. Or, press the Number 2 button to select Spanish on-screen dis- plays. (SI) will appear to the right of ESPAÑOL on-screen.

TO SELECT PUSH NO. SHOWN

1	ENGLISH	(ON)
2	ESPAÑOL

MAKE SELECTION OR

PUSH MENU TO CONTINUE

4

Press the MENU button. The menu shown below will appear, giving you the option to set up the Cable Box Controller now.

CABLE BOX CONTROLLER

OFF

TO SELECT PRESS NUMBER

1ON

2OFF

TO CONTINUE PUSH MENU

TO END PUSH EXIT

5

If you do not want to set up the Cable Box Controller now, press the Number 2 button to leave the Cable Box Controller turned OFF. Proceed to step 6 on page 11. You

may set up the Controller later by following the instructions on pages 42 - 46.

If you do want to set up the Cable Box Controller now, press the Number 1 button to turn the Cable Box Controller ON. Press the MENU button, then follow steps 4 - 6 on page 14. When you finish setting the clock, complete steps 7 - 11 on page 44. When you finish setting up the Cable Box Controller, go to step 9 on page 11.

1 Turn on the TV.

2

CBL/DSS	VCR	TV
EJECT	POWER	MUTE

VOL F.ADV CHANNEL

PAUSE/STILL

PLAY

REWFF

	VCR PLUS+		LIGHT
	/ENTER
		STOP
5 EXIT/STATUS MENU			CLEAR		4
3	1	2	3
	4	5	6
	7	8	9
	100	0	GO-TO
	REC/OTR	INDEX	MEMORY
		...
		...
		VAR. SLOW	TRACKING	SKIP
	SPEED VCR/TV SLOW			SEARCH

REMOTE LOCATOR

Helpful Hints

•Leave the Cable Box turned on if you plan to set up the Cable Box Controller now.

•Set the Cable Box to a channel other than channel 09.