Contents | Connections | Playback | Settings | Tips | Appendix |
Connecting devices with remote control connectors
Performing operations by RC on this unit without visual contact
You can connect an external IR receiver to the REMOTE CONTROL connectors to perform operations on this unit with the supplied remote control unit without visual contact. This might be necessary if the unit is hidden in a cupboard or corner, so you can’t directly point with the remote control unit to the device.
To do this, disable the remote control signal receiving function
(vpage 30 “Setting the remote signal receiving function of the remote control unit”).
IR receiver
Remotely connecting Marantz devices
You can transmit remote control signals simply by connecting a Marantz audio device to the REMOTE CONTROL IN/OUT connectors using the remote connection cable provided with the device.
Set the remote control switch located on the rear panel of the connected audio component to “EXTERNAL” to use this feature.
RC OUT
NOTE
•When the remote control signal receiving function is disabled, you can not perform operations with the remote control unit.
|
|
|
|
|
|
|
| 21 |
|
|
Front panel |
|
| Rear panel |
|
| Remote |
| Index |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
