Marantz PM6005 1, 1

30

Appendix

TipsPlaybackConnections

Contents

Front panel Rear panel IndexRemote

Settings

Setting the remote signal receiving function of the remote control unit

When you connect a IR receiver (sold separately) to the REMOTE

CONTROL IN connector of this unit, use the following procedure to

disable the remote signal receiving function of this unit. When the function

is enabled, you can not perform operations with the remote control unit.

By default, this function is enabled.

SPEAKERS BSPEAKERS A

Disabling the remote signal receiving

function of the remote control unit

1While the remote signal receiving function of this unit

is enabled, press and hold SPEAKERS B for about 5

seconds.

The mute indicator ﬂashes once, and the remote signal receiving

function is disabled.

Enabling the remote signal receiving

function of the remote control unit

1While the remote signal receiving function of this unit

is disabled, press and hold SPEAKERS A for about 5

seconds.

The mute indicator ﬂashes three times, and the remote signal

receiving function is enabled.

Contents

Main Part names and functions Connections Contents Playback Settings Tips Appendix Accessories q Getting Started w CD-ROM (Owners Manual) e Safety Instructions r u t Power cord y Remote control unit Inserting the batteries Operating range of the remote control unit Features High quality sound High performance Easy operation Front panel Part names and functions Page Rear panel Remote control unit Amplier and Tuner operation CD player operation Network audio player operation Connections 2Cables used for connections Speaker connection Connecting the speakers cables 1 2 3 4 Speaker A/B connection Bi-wiring connection HIGH LOW Connecting a playback device Connecting a recording device Connecting a TV/Devices with digital audio connectors Connecting devices with remote control connectors Performing operations by RC on this unit without visual contact Remotely connecting Marantz devices Connecting the power cord 2Connection to the AC outlet nSWITCHED nUNSWITCHED WARNING : Playback Turning the power on 1 2Turning the power o 2 Adjusting the volume 1 Turning o the sound temporarily 1 Adjusting the tone 2 Selecting the speakers for audio output 1 Selecting the input source Page Page Settings SOURCE DIRECT Turning Auto Standby mode o 1 Setting the Auto Standby mode Turning Auto Standby mode on 1 Setting the remote signal receiving function of the remote control unit SPEAKERS BSPEAKERS A Disabling the remote signal receiving function of the remote control unit 1 Enabling the remote signal receiving function of the remote control unit 1 ENTER REMOTE MODE CD 1 3 Setting remote control codes for the remote control 1 Setting remote control codes 2 for 5 seconds or longer. 2To set the remote control codes to AMP3 1 3 for 5 seconds or longer. Setting remote control codes for this unit Tips Contents 2Tips ....................................................................(34) 2Troubleshooting ..............................................(35) Tips Troubleshooting 2Power does not turn on / Power is turned o Page 2Operations cannot be performed through the remote control unit 2No sound comes out 2Desired sound does not come out 2Sound is interrupted or noise occurs Appendix Playback on devices that have digital audio terminals 2Supported audio formats % Explanation terms Specications Index TipsSettingsPlaybackConnections Contents Front panel Rear panel IndexRemote Appendix 2Dimensions Unit : in. (mm) 2Weight : 16 lbs 12 oz (7.6 kg)