User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified login user. The valid authentication protocols are none, md5 or sha. If md5 or sha are specified, the user login password will be used as the snmpv3 authentication password. The <username> is the login user name for which the specified authentication protocol will be used.
Default | no authentication |
Format | users snmpv3 authentication <username> {none md5 |
| sha} |
Mode | Global Config |
no users snmpv3 authentication
This command sets the authentication protocol to be used for the specified login user to none. The <username> is the login user name for which the specified authentication protocol will be used.
Format | users snmpv3 authentication <username> |
Mode | Global Config |
users snmpv3 encryption
This command specifies the encryption protocol and key to be used for the specified login user. The valid encryption protocols are none or des. The des protocol requires a key, which can be specified on the command line. The key may be up to 16 characters long. If the des protocol is specified but a key is not provided, the user will be prompted for the key. If none is specified, a key must not be provided. The <username> is the login user name for which the specified encryption protocol will be used.
Default | no encryption |
Format | users snmpv3 encryption <username> {none des [key]} |
Mode | Global Config |
no users snmpv3 encryption
This command sets the encryption protocol to none. The <username> is the login user name for which the specified encryption protocol will be used.
Format | no users snmpv3 encryption <username> |
Mode | Global Config |
|
|
Switching Commands |
