User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
set igmp maxresponse
This command sets the IGMP Maximum Response time on the system. The Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an interface because it did not receive a report for a particular group in that interface. This value must be less than the IGMP Query Interval time value. The range is 1 to 3600 seconds.
Default | 10 seconds |
Format | set igmp maxresponse |
Mode | Global Config |
no set igmp maxresponse
This command sets the IGMP Maximum Response time on the system to 10 seconds.
Format | no set | igmp maxresponse |
Mode | Global | Config |
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time on the system. This is the amount of time in seconds that a switch will wait for a query to be received on an interface before the interface is removed from the list of interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.
Default | 0 |
Format | set igmp mcrtexpiretime |
Mode | Global Config |
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time on the system to 0. A value of 0 indicates an infinite timeout, i.e. no expiration.
Format | no set | igmp mcrtexpiretime |
Mode | Global | Config |
show garp
This command displays Generic Attributes Registration Protocol (GARP) information.
Switching Commands |
