
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Netdir Bcast | Indicates if IP forwards |
| Possible values are Enable or Disable. |
MultiCast Fwd | Indicates the multicast forwarding administrative mode on the |
| interface. Possible values are Enable or Disable. |
In Access Mode | Indicates the inbound access list checking administrative mode |
| on this interface. Possible values are Enable or Disable. |
Out Access Mode | Indicates the outbound access list checking administrative mode |
| on this interface. Possible values are Enable or Disable. |
show ip irdp
This command displays the router discovery information for all interfaces, or a specified interface.
Format | show ip irdp <slot/port all> |
Mode | Privileged EXEC and User EXEC |
Ad Mode | Displays the advertise mode which indicates whether router dis- |
| covery is enabled or disabled on this interface. |
Max Int | Displays the maximum advertise interval which is the maximum |
| time allowed between sending router advertisements from the |
| interface in seconds. |
Min Int | Displays the minimum advertise interval which is the minimum |
| time allowed between sending router advertisements from the |
| interface in seconds. |
Adv Life | Displays advertise lifetime which is the value of the lifetime field |
| of the router advertisement sent from the interface in seconds. |
Preferences | Displays the preference of the address as a default router address, |
| relative to other router addresses on the same subnet. |
show ip ospf
This command displays information relevant to the OSPF router. This command takes no options.
Format | show ip ospf |
Mode | Privileged EXEC and User EXEC |
Router ID | Is a 32 bit integer in dotted decimal format identifying the router, |
| about which information is displayed. This is a configured value. |
|
|
Routing Commands |