IMPORTANT:
After pressing the Program button for the first time, you must select the preset Memory number and press the Program button again to store the station within ten seconds while the MEMORY indicator is flashing in the display. If the MEMORY indicator stops flashing before you press the Program button for the second time, the station will not be stored in the Memory. If this should occur, press the Program button again so that the MEMORY indicator is flashing, then press your desired memory location button and press the Program button again.
TO CHANGE A PRESET STATION
If you wish to change one of your previously memorized stations, simply enter a new station into the memory location that you wish to change. When the new station is entered into a memory, the station previously stored in that memory will be erased.
SELECTING A PRESET STATION
After you have stored up to 20 AM and FM stations in the preset tuner memories, you can select any of the memorized stations quickly and easily as follows:
1.Press the Tuner/Band button to select the Tuner mode.
2.Press the Tuner/Band button again to select the desired band, if necessary.
3.Press the number key that corresponds to the desired station.
4.Press the 1 through 9 keys to select preset memories numbers 1 through 9.
5.To select preset memory 10, press the “10+”, “1” and “0” keys in order.
6.To select memory above 10, you must press three keys in sequence, the “10+” key, and then the two keys which correspond to the memory number you wish to select.
For example: To select preset number 15, press “10+”, “1”, and “5” keys in order.
22
