Emerson ES1 owner manual Setting The Timer, SETTING “On” TIME

SETTING THE TIMER

This system includes a built-in timer that will automatically switch the power ‘On’ at whatever time you select, play for the length of time you desire and then shut itself ‘Off’ automatically.

SETTING “On” TIME

Note: In order for the timer to operate correctly, the clock must also be set correctly. If you have not yet set the clock, please refer to the instructions for setting the clock on Page 11 and set the clock correctly before you begin setting the Timer.

You may set the Timer using either the controls on the top panel of the main unit or the keys on the remote control handset.

1. Press the Timer/Snooze button on either the main unit or the remote control handset to begin setting the ‘On’ time. The TIMER indicator appears in the display and the ON indicator and Time display begin flashing.

2.Press the Up button on the top panel or the Hour button on the remote control handset to adjust the display to the desired ‘On’ hour. Be sure to observe the AM/PM indicators to confirm that you are setting the hour correctly for AM or PM.

3.Press the Down button on the top panel or the Minute button on the remote control handset to adjust the Time display to the desired ‘On’ minute.

4.When the desired ‘On’ time is flashing in the

display, press the Timer/Snooze button once more. The ON indicator disappears and the OFF indicator begins flashing in the display.

Use the Up / Down buttons on the main

unit or the Hour/Minute buttons on the remote control handset to set the display to the desired ‘Off’ time.

5.When the desired ‘Off’ time is flashing in the display press the Timer/Snooze button on the main unit or the remote handset once more. The OFF indicator stops flashing and the display returns to the correct time of day. The TIMER indicator remains in the upper left-hand corner of the display.

24