Emerson ES1 owner manual Sleep Timer Operation

SLEEP TIMER OPERATION

This unit incorporates a sleep timer which allows you to listen to radio or CD while you fall asleep and then the system will shut off automatically. The Sleep timer can be set for as few as 10 minutes or for as long as 2 hours (120 minutes) before shutting off automatically.

To operate the Sleep Timer, proceed as follows:

1.Select the desired mode, Tuner or CD, and adjust the volume, preset EQ, and X-BASS controls as desired.

2.Press the Sleep button on the main unit or on the remote control handset. The SLEEP indicator and the number 10 (minutes) appear in the display. This indicates that the unit will turn off automatically after 10 minutes.

3.To increase the amount of time before auto turn-off, continue pressing the Sleep button. Each time you press the Sleep button, the amount of sleep time will increase by 10 minutes, up to a maximum of 2 hours (120 minutes). If the Sleep button is pushed again while 120 minutes appears on the display, it will revert back to 10 minutes.

4.After 5 seconds, the Sleep time indication disappears and the display returns to either radio frequency or CD Track/Time display. However, the SLEEP indicator remains in the display to confirm that the unit is in the Sleep/Timer mode.

5.After the Sleep Timer counts down to zero, the unit shuts off automatically and returns to the Standby mode.

To shut the unit off before the Sleep Timer counts down to “00”, press the Power button to return the unit to the Standby mode. The SLEEP indicator disappears from the display.

26