AUTO POWER ON
This system includes Auto Power On circuitry. Once the system is connected to your household outlet you can turn the system ‘On’ by simply pressing the appropriate button for the function you would like to hear. It is not necessary to press the Power button first and then press a function button. For example, to turn the system ‘On’ to the tuner function you may simply press the Tuner/ Band button directly.
LISTENING TO THE RADIO
Note: Make sure that both the external AM loop antenna and the FM dipole antenna have been properly connected to the antenna terminals on the back panel of this system. Refer to the instructions on page 9 if necessary.
1.Press the Tuner/Band button to turn the system ‘On’ to the radio function. The Standby indicator goes off, the main display turns on and displays an AM or FM radio frequency.
2.To select a different band if necessary, press the Tuner/Band button again. Each time you press the Tuner/Band button while in the Tuner mode, the tuner switches between the AM and FM bands.
3.Use the Up 
/Down 
buttons on the top panel to tune to your desired station as follows:
•Manual Tuning – press the Up 
or Down 
button repeatedly until the frequency of your station appears in the display.
•Automatic Tuning – hold the Up 
or Down 
button until the display begins to scan and then release the button. The tuner will search up or down for the next strong station and stop on that station. Repeat this step until the frequency of your desired station appears in the display.
4.Adjust the Volume control to the desired level.
5.Adjust the tone quality by pressing the Preset EQ button on the top panel to select the appropriate setting. The Preset EQ settings are: POPS>ROCK>CLASSIC>JAZZ>FLAT (EQ ‘Off’). The selected setting appears in the display.
Note: These settings are a matter of personal taste.
For example, if you find that you enjoy all types of music with the preset EQ set to ‘POPS’, feel free to leave the EQ in the ‘POPS’ setting all the time.
12
