6.At the selected ‘On’ time, the system will turn on automatically. It will play until it reaches the ‘Off’ time you selected and will then shut itself off. It will repeat this automatic on/off cycle every day at the same time as long as the TIMER indicator appears in the display. To cancel the automatic on/off timer, press the Timer/Snooze button on the main unit or on the remote control until the TIMER indicator disappears from the display.
TIMER OPERATION
The Timer can be used to turn the unit ‘On’ to radio or to begin CD playback.
RADIO OPERATION BY TIMER
•After setting the Timer ‘On’ and Timer ‘Off’ times, as described above, press the Tuner/Band button to turn the unit on to the Tuner mode. Tune to the station you wish to hear when the system turns ‘On’ and adjust the volume, preset EQ, and
•Press the power button to switch the unit back to the standby mode. The STANDBY indicator comes on. At the
CD OPERATION BY TIMER
•After setting the Timer ‘On’ and Timer ‘Off’, as described above, press the Power button to turn the system on, insert a CD in the CD compartment, press the Play/Pause 
button to switch the unit to the CD mode and begin playback.
•Adjust the volume control, preset EQ , and
button to stop playback.
•Press the Power button to switch the unit back to the Standby mode.
At the
SNOOZE OPERATION
After the unit switches ‘On’ automatically in either the radio or the CD modes, you may press the Timer/Snooze button on the main unit or the remote control to activate the snooze function. The radio or CD will stop for approximately 5 minutes and will then switch on again automatically.
Note: If the Snooze button is pressed when there is less than 5 minutes remaining before the Timer ‘Off’ time, the unit will not turn on again automatically. Instead, when the Timer ‘Off’ time is reached, the unit will enter the Standby mode.
25
