NETGEAR 7300 Series user manual System Utilities, Users defaultlogin, Users login, Clear config

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

802.1x Port Security This field displays the authentication login list assigned to the user for 802.1x port security.

users defaultlogin

This command assigns the authentication login list to use for non-configured users when attempting to log in to the system. This setting is overridden by the authentication login list assigned to a specific user if the user is configured locally. If this value is not configured, users will be authenticated using local authentication only.

Format	users defaultlogin <listname>
Mode	Global Config

users login

This command assigns the specified authentication login list to the specified user for system login. The <user> must be a configured <user> and the <listname> must be a configured login list.

If the user is assigned a login list that requires remote authentication, all access to the interface from all CLI, web, and telnet sessions will be blocked until the authentication is complete.

Note that the login list associated with the ‘admin’ user can not be changed to prevent accidental lockout from the switch.

Format	users login <user> <listname>
Mode	Global Config

System Utilities

This section describes system utilities.

clear config

This command resets the configuration to the factory defaults without powering off the switch. The switch is automatically reset when this command is processed. You are prompted to confirm that the reset should proceed.

Format	clear config
8-112	Switching Commands

202-10009-01_060204