User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Note: None of the counters listed here are guaranteed to be supported on all platforms. Only supported counters are shown in the display output.

show service-policy

This command displays a summary of policy-oriented statistics information for all interfaces in the specified direction. The direction parameter indicates the interface direction of interest.

This command enables or disables the route reflector client. A route reflector client relies on a route reflector to re-advertise its routes to the entire AS. The possible values for this field are

enable and disable.

Format

show service-policy [in out]

Mode

Privileged EXEC

The following information is repeated for each interface and direction (only those interfaces configured with an attached policy are shown):

Interface

The slot number and port number of the interface (slot/port).

Dir

The traffic direction of this interface service, either in or out.

Operational Status

The current operational status of this DiffServ service interface.

Offered Packets

A count of the total number of packets offered to all class

 

instances in this service before their defined DiffServ treatment is

 

applied. These are overall per-interface per-direction counts.

Discarded Packets

A count of the total number of packets discarded for all class

 

instances in this service for any reason due to DiffServ treatment.

 

These are overall per-interface per-direction counts.

Sent Packets

A count of the total number of packets forwarded for all class

 

instances in this service after their defined DiffServ treatments

 

were applied. In this case, forwarding means the traffic stream

 

was passed to the next functional element in the data path, such as

 

the switching or routing function or an outbound link transmis-

 

sion element. These are overall per-interface per-direction counts.

Policy Name

The name of the policy attached to the interface.

Note: None of the counters listed here are guaranteed to be supported on all platforms. Only supported counters are shown in the display output.

CLI Commands: Differentiated Services

10-25

202-10009-01_060204

Page 267
Image 267
NETGEAR 7300 Series user manual Show service-policy, Dir, Offered Packets, Discarded Packets, Sent Packets