User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Format | no | out} <policymapname> |
Mode | Global Config (for all system interfaces) | |
Mode | Interface Config (for | a specific interface) |
Show Commands
The 'show' command set is used in DiffServ to display configuration and status information for:
•Classes
•Policies
•Services
This information can be displayed in either summary or detailed formats. The status information is only shown when the DiffServ administrative mode is enabled; it is suppressed otherwise.
There is also a 'show' command for general DiffServ information that is available at any time.
show class-map
This command displays all configuration information for the specified class. The <classname> is the name of an existing DiffServ class.
Format | show |
Mode | Privileged EXEC and User EXEC |
If the Class Name is specified the following fields are displayed:
Class Name | The name of this class. |
|
Class Type | The class type (all, any, or acl) indicating how the match criteria | |
| are evaluated for this class. A class type of all means every match | |
| criterion defined for the class is evaluated simultaneously they | |
| must all be true to indicate a class match. For a type of any each | |
| match criterion is evaluated sequentially and only one need be | |
| true to indicate a class match. Class type acl rules are evaluated in | |
| a hybrid manner, with those derived from each ACL Rule |
|
| grouped and evaluated simultaneously, while each such grouping | |
| is evaluated sequentially. |
|
|
| |
CLI Commands: Differentiated Services | ||
