NETGEAR 7300 Series user manual Port-channel name, Protocol group, No port-channel linktrap

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Default	Enabled
Format	port-channel linktrap {<logical slot/port> all}
Mode	Global Config
no port-channel linktrap

This command disables link trap notifications for the port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option all sets every configured port- channel with the same administrative mode setting.

Format	no port-channel linktrap {<logical slot/port> all}
Mode	GlobalConfig

port-channel name

This command defines a name for the port-channel (LAG). The interface is a logical slot and port for a configured port-channel, and name is an alphanumeric string up to 15 characters. This command is used to modify the name that was associated with the port-channel when it was created.

Format	port-channel name {<logical slot/port> all} <name>
Mode	Global Config

protocol group

This command attaches a <vlanid> to the protocol-based VLAN identified by <groupid>. A group may only be associated with one VLAN at a time, however the VLAN association can be changed.

Default	none
Format	protocol group <groupid> <vlanid>
Mode	VLAN database
no protocol group

This command removes the <vlanid> from this protocol-based VLAN group that is identified by this <groupid>.

Format	no protocol group <groupid> <vlanid>
Mode	VLAN database
Switching Commands	8-43

202-10009-01_060204